Axles / Trailer Accessories - Page 2 - Huge Savings! Save up to 15%


Huge Savings! Up to 15% off on Axles (in Trailer Accessories) at Bayfield Farms, Page 2 [65]. Top brands include Southwest Wheel, Yukon Gear, JDMSPEED, Rockwell American, Tie Down Engineering, Tie Down, VGEBY1, Aliturtle, Moser Engineering, & AB Tools. Hurry! Limited time offers. Offers valid only while supplies last.



Southwest Wheel Tandem Trailer Axle Hanger Kit for 2" Slipper Springs
By Southwest Wheel
In Stock
$84.75

mpn: APT288SEBX,

4.0 out of 5 stars with 14 reviews
Contains the following: 2 - 3.75'' Front Hangers 2 - 5'' Rear Hangers 2 - 3.5'' Center Hangers 2 - 7/8'' x 4 3/4'' Carriage Bolts 2 - 7/8'' Lock Nuts 8 - 9/16'' Lock Nuts 8 - 9/16'' x 3 1/2'' Shackle BoltsTandem Axle Hanger Kit for 2'' Slipper Springs. Contains everything you need to attach trailer springs to the frame of you trailer..


Yukon Gear & Axle (YHC70001) Locking Hub Kit for Dana 60 35 Spline
By Yukon Gear
In Stock
$400.75
$338.93
You Save: 15%

mpn: YHC70001, ean: 0883584290827,

4.9 out of 5 stars with 55 reviews
Yukon Hardcore Locking Hubs provide manual locking via an all steel construction. Designed for off-road, street and towing usage.Limited Lifetime Warranty. All Steel Construction. Low Profile Bezel to Reduce Impact with Obstacles. Defaults to Locked Position. Complete Install Package.


JDMSPEED New 2 Trailer Idler Hub Kits 5 on 4.5" for 2000 lbs Axle 1-1/16" Bearings
By JDMSPEED
In Stock
$62.99

mpn: 22016K, ean: 0711766843700,

4.8 out of 5 stars with 53 reviews
Fits Most 2,000 lb Hubs 1 1/6'' bearing (inner and outer) Easy Lube 5 on 4.5'' Bolt Circle GreasedSet of 2 New trailer idler hub kits 5 on 4.5 for 2,000 lbs trailer axle, for 1-1/16'' straight spindle. Kits also includ: 4x L44649 outer cone bearings, 2x Grease seals 1-1/16'', 2x E Z lube grease caps with rubber plug; 10 cone wheel nuts 1/2''-20 thread. Bolt pattern: 5 on 4.5'', bearing races and 1/2''-20 studs installed. pls noted, this hub fit straight spindles, not for tapered spindles. 1 year


3,500 lb Idler Trailer Axle Running Gear ( Idler Axle W/ Hubs, Bearings, Lugs & Nuts, Springs, U-bolt Kit, Hanger kit. (95" Hubface, 80" Spring Center)
By Rockwell American
In Stock
$383.02

mpn: TS, ean: 0719975184614,

4.1 out of 5 stars with 23 reviews
Set Comes With: (1) 3500 lb Capacity Idler Axle with Hubs, Bearings, Lugs & Nuts (2 Year Warranty) (1) U-Bolt Kit, Rd, 2.375''x5.5''x.5''-20 With U-Bolts, Plates, Washers & Nuts. (1) Hanger Kit, for Single Axle & Double Eye Springs, 3500 lb Capacity. (2) Springs, Double Eye, 1.75'' Wide, 1750 lb Capacity Ea , 4 Leaf, ( 25.25'' Eye to Eye, 3'' Arch, 9/16'' Eye Comes Unassembled.) (1) 32 oz Johnson Trailer Parts Insulated Mug.Rockwell American 3,500 lb Idler Axle- Running Gear Set - Made in the US


3,500 lb Idler Trailer Axle Running Gear ( Idler Axle W/ Hubs, Bearings, Lugs & Nuts, Springs, U-bolt Kit, Hanger kit. (61"Hubface, 46" Spring Center)
By Rockwell American
In Stock
$333.02

mpn: TS, ean: 0719975184577,

4.2 out of 5 stars with 60 reviews
Set Comes With: (1) 3500 lb Capacity Idler Axle with Hubs, Bearings, Lugs & Nuts (2 Year Warranty) (1) U-Bolt Kit, Rd, 2.375''x5.5''x.5''-20 With U-Bolts, Plates, Washers & Nuts. (1) Hanger Kit, for Single Axle & Double Eye Springs, 3500 lb Capacity. (2) Springs, Double Eye, 1.75'' Wide, 1750 lb Capacity Ea , 4 Leaf, ( 25.25'' Eye to Eye, 3'' Arch, 9/16'' Eye Comes Unassembled.) (1) 32 oz Johnson Trailer Parts Insulated Mug.Rockwell American 3,500 lb Idler Axle - Running Gear Set - Made in the U


3,500 lb Idler Trailer Axle with Double Eye Springs and U-Bolts ( 89" Hub Face, 74" Spring Center ) 5 Lug on 4.5 Bolt Pattern
By Rockwell American
In Stock
$363.83

mpn: TS35890740545IBC, ean: 0719975184676,

4.0 out of 5 stars with 26 reviews
Johnson Trailer Parts cannot guarantee you will receive the correct product if you purchase from other sellers. American Made Trailer Axle from Rockwell American. Comes with a 2 yr Manufacturers Warranty. Free delivery to a commercial/ business address or shipping terminal near you. Trailer axle kits will be delivered on a shipping pallet. Residential (UPS,FedEx, Lift Gate) deliveries will require an additional fee. Please call for more details, Thank you. (602) 292-9690. Includes a 32 oz Johnso


Tie Down Engineering 4-Lug Hub/Spindle End Unit for Build your own Trailer Axle System - 1250-Lb. Capacity Per Hub, Model Number 80115
By Tie Down Engineering
In Stock
$59.99

mpn: 80115, ean: 0081628801156,

4.7 out of 5 stars with 52 reviews
Tie Down Engineering components make it possible for you to build trailer axles that exactly fit your specifications. By choosing the hub, spindle and axle tube you need and building it yourself, you save money and get a better result. Axle tubes are available in 1350-, 1500- or 3500-lb. capacities, with corresponding spindles and hubs. Axle tubes are 72in. long and can be cut to the exact length needed for your application. Welding an axle requires the proper equipment and skill needed to apply


Tie Down Engineering 5-Lug Hub/Spindle End Unit for Build Your Own Trailer Axle System - 1350-Lb. Capacity per Hub, Model Number 80116
By Tie Down
In Stock
$69.99

mpn: 80116, ean: 0081628801163,

4.3 out of 5 stars with 56 reviews
Tie Down Engineering components make it possible for you to build trailer axles that exactly fit your specifications. By choosing the hub, spindle and axle tube you need and building it yourself, you save money and get a better result. Axle tubes are available in 1500- or 3500-lb. capacities, with corresponding spindles and hubs. Axle tubes are 72in. long and can be cut to the exact length needed for your application. Welding an axle requires the proper equipment and skill needed to apply a prop


3,500 lb Idler Trailer Axle Running Gear ( Idler Axle W/ Hubs, Bearings, Lugs & Nuts, Springs, U-bolt Kit, Hanger kit. (89" Hubface, 74" Spring Center)
By Rockwell American
In Stock
$383.02

mpn: TS, ean: 0719975184607,

4.2 out of 5 stars with 9 reviews
Set Comes With: (1) 3500 lb Capacity Idler Axle with Hubs, Bearings, Lugs & Nuts (2 Year Warranty) (1) U-Bolt Kit, Rd, 2.375''x5.5''x.5''-20 With U-Bolts, Plates, Washers & Nuts. (1) Hanger Kit, for Single Axle & Double Eye Springs, 3500 lb Capacity. (2) Springs, Double Eye, 1.75'' Wide, 1750 lb Capacity Ea , 4 Leaf, ( 25.25'' Eye to Eye, 3'' Arch, 9/16'' Eye Comes Unassembled.) (1) 32 oz Johnson Trailer Parts Insulated Mug.Rockwell American 3,500 lb Idler Axle - Running Gear Set - Made in the U


3,500 lb Idler Trailer Axle with Double Eye Springs and U-Bolts ( 73" Hub Face, 58" Spring Center ) 5 Lug on 4.5 Bolt Pattern
By Rockwell American
In Stock
$313.83

mpn: TS35730580545IBC, ean: 0719975184652,

4.4 out of 5 stars with 26 reviews
American Made Trailer Axle from Rockwell American. Comes with a 2 yr Manufacturers Warranty. Includes a 32 oz Johnson Trailer Parts Insulated MugRockwell American 3,500 lb Idler Axle - Running Gear Set - Made in the USA. This Axle Kit Includes: (1) Idler Axle with Hubs, Bearings, Lugs & Nuts, (2) Double Eye Springs, (1) U-bolt Kit, (1) 32 oz Johnson Trailer Parts Insulated Mug. This Axle Comes with a Superior Powder Coated Finish and Posi-Lube Spindles that Provide Continuous Bearing Protection.


VGEBY1 2pcs RC Drive Shaft, Drive Axle Transmission Shaft RC Car Front and Rear Drive Shaft for RC Crawler
By VGEBY1
In Stock
$16.99

mpn: VGEBY40bdf3qor1, ean: 0791655736054,

4.8 out of 5 stars with 26 reviews
Features: GOOD PERFORMANCE: Drive Axle Transmission Shaft has exquisite workmanship and high performance, which can provide stability for your RC car. HIGH QUALITY: Adopting high quality material, hte RC Drive Shaft is durable and wear-resistant. WELL FIT: With high precision and good compatibility, thus can fit for your RC car well, really a perfect replacement accessory for the old or broken one. GOOD COMPATIBLITY: Our RC Car Drive Shaft can compatible with Traxxas T R X-4 RC crawler. Specifi


Aliturtle Lightweight Backpack School Bags for Boys Girls Women Men, Classic Basic Waterproof Casual Daypack School Bags for Travel with Bottle Side Pockets (Red)
By Aliturtle
In Stock
$22.46

mpn: gh35, ean: 0074531546054,

4.9 out of 5 stars with 8 reviews
✈✈✈✈✈✈✈✈✈✈✈✈✈✈✔✔ Features:Large compartment and pockets can contain notebooks, pens, sunglasses, water bottle, calculator, cosmetics, headphones, cell phone, laptop, clips and all your accessories and nicknacks. Made from water resistant polyester fabric, featuring a reinforced bottom and durable metal accessories.Light-weight Carrying and perfect for business traveling, weekend getaways, school, shopping etc.✔✔Suitable for a variety of SituationsFOR SCHOOL-S


3,500 lb Idler Trailer Axle Running Gear ( Idler Axle W/ Hubs, Bearings, Lugs & Nuts, Springs, U-bolt Kit, Hanger kit. (73" Hubface, 58" Spring Center)
By Rockwell American
In Stock
$333.02

mpn: TS, ean: 0719975184584,

4.1 out of 5 stars with 54 reviews
Set Comes With: (1) 3500 lb Capacity Idler Axle with Hubs, Bearings, Lugs & Nuts (2 Year Warranty) (1) U-Bolt Kit, Rd, 2.375''x5.5''x.5''-20 With U-Bolts, Plates, Washers & Nuts. (1) Hanger Kit, for Single Axle & Double Eye Springs, 3500 lb Capacity. (2) Springs, Double Eye, 1.75'' Wide, 1750 lb Capacity Ea , 4 Leaf, ( 25.25'' Eye to Eye, 3'' Arch, 9/16'' Eye Comes Unassembled.) (1) 32 oz Johnson Trailer Parts Insulated Mug.Rockwell American 3,500 lb Idler Axle - Running Gear Set - Made in the U


Rockwell American 3,500 lb Electric Brakes Trailer Axle w/Double Eye Springs & U-Bolts (85" Hub Face, 70" Spring Center) 5 Lug on 4.5 Bolt Pattern
By Rockwell American
In Stock
$482.00

mpn: TS35850700545IBC -Brake, ean: 0733781136827,

4.0 out of 5 stars with 31 reviews
American Made Trailer Brake Axle from Rockwell American. Comes with a 2 yr Manufacturers Warranty. This Axle Comes with a Superior Powder Coated Finish and Posi-Lube Spindles that Provide Continuous Bearing Protection. Includes a 32 oz Johnson Trailer Parts Insulated Mug.Rockwell American 3,500 lb Electric Brake Trailer Axle - Running Gear Set - Made in the USA. This Axle Kit Includes: (1) Electric Brake Axle with Hubs, Bearings, Lugs & Nuts (2 Year Mfg Warranty), (2) Double Eye Springs, (1) U-b


3,500 lb Idler Trailer Axle with Double Eye Springs and U-Bolts ( 61" Hub Face, 46" Spring Center ) 5 Lug on 4.5 Bolt Pattern
By Rockwell American
In Stock
$313.83

mpn: TS-RG, ean: 0719975184645,

4.9 out of 5 stars with 54 reviews
American Made Trailer Axle from Rockwell American. Comes with a 2 yr Manufacturers Warranty. Includes a 32 oz Johnson Trailer Parts Insulated Mug.Rockwell American 3,500 lb Idler Axle - Running Gear Set - Made in the USA. This Axle Kit Includes: (1) Idler Axle with Hubs, Bearings, Lugs & Nuts, (2) Double Eye Springs, (1) U-bolt Kit, (1) 32 oz Johnson Trailer Parts Insulated Mug. This Axle Comes with a Superior Powder Coated Finish and Posi-Lube Spindles that Provide Continuous Bearing Protection


3,500 lb Standard Idler Trailer Axle - 73" Hubface, 58" Spring Center - Bolt Pattern 5x4.5 ( Idler Axle W/ Hubs, Bearings, Lugs & Nuts)
By Rockwell American
In Stock
$249.99

mpn: TS35730580545IBC, ean: 0733781136643,

4.7 out of 5 stars with 32 reviews
American Made Trailer Axle from Rockwell American. Comes with a 2 yr Manufacturers Warranty. Includes a 32 oz Johnson Trailer Parts Insulated Mug.Complete Rockwell American 3,500 lb Idler Axle - Made in the USA. 3,500 lb Idler Axle with Hubs, Bearings, Lugs & Nuts (2 Year MFG Warranty) & (1) 32 oz Johnson Trailer Parts Insulated Mug. This Axle Comes with a Superior Powder Coated Finish and Posi-Lube Spindles that Provide Continuous Bearing Protection. 5 Lug on 4.5 Bolt Pattern (other bolt patter


Yukon Gear & Axle (YHC70003) Locking Hub Kit for Dana 60 30 Spline
By Yukon Gear
In Stock
$337.64

mpn: YHC70003, ean: 0883584290841,

4.5 out of 5 stars with 54 reviews
Yukon Hardcore Locking Hubs provide manual locking via an all steel construction. Designed for off-road, street and towing usage.Limited Lifetime Warranty. All Steel Construction. Low Profile Bezel to Reduce Impact with Obstacles. Defaults to Locked Position. Complete Install Package.


Moser Engineering A3070GMT2 Moser C/A Axle Set GM2wd Truck 12-Bolt 30-Spl
By Moser Engineering
In Stock
$259.99

mpn: A3070GMT2, ean: 0099998226400,

4.1 out of 5 stars with 59 reviews
These forged steel street Axles for your stock OEM application are non-tapered, with hardened & ground bearing seats and machined C-Clip grooves. For your stock OEM application. Non-tapered, with hardened & ground bearing seats and machined c-clip grooves.  Forged Steel street axles.


Rockwell American 3,500 lb Idler Trailer Axle w/Leaf Springs, U-Bolts & Hanger Kit- 5x4.5 Bolt Pattern (95" Hubface - 80" Spring Center)
By Rockwell American
In Stock
$299.99

mpn: TS,RG,HK545IBC, ean: 0733781137404,

4.2 out of 5 stars with 18 reviews
Johnson Trailer Parts cannot guarantee you will receive the correct product if you purchase through a different seller. American Made Trailer Axle from Rockwell American. Comes with a 2 yr Manufacturers Warranty. Free Delivery to a Commercial Business Address or Shipping Terminal near you in Metropolitan Areas in the Lower 48 States . Remote Locations and Residential (UPS,FedEx, Liftgate) deliveries will require an additional fee. Please call for more details, Thank you. (602) 292-9690. Includes


AB Tools 750kg Suspension Units Hubs Mini Wheels Extended Stubs Trailer 23.5mm Offset
By AB Tools
In Stock
$574.18

mpn: 750kg_MiniKit, ean: 5056133371994,

4.6 out of 5 stars with 19 reviews
This listing is for a pair (left and right) of suspension units. Very heavy duty construction make this suitable for daily use by business. Far tougher and long lasting than most 750kg suspension units. Please be aware that the new style mini wheels have a grease nipple so old rims can't be used on this hub. However the offest is still the same.Suspension Unit Specifications: This listing is for a pair (left and right) of suspension units. Fitted with standard 1'' trailer stub axles. Maximum wei



Viewing Page 2 of 3



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - bayfieldfarms.com. All Rights Reserved.